HARDNESS AND FRATURE TOUGHNE OF PLASMA SPRAYED ZIRCONIA-CERIA-YTTRIA THERMAL BARRIER COATINGS

Authors

  • Mohammed J Kadhim Department of Production Engineering and Metallurgy University of Technology, Baghdad, Iraq
  • Mohammed H Hafiz College of Engineering, Al-Iraqi University
  • Maryam A Ali Bash Department of Production Engineering and Metallurgy University of Technology, Baghdad, Iraq

DOI:

https://doi.org/10.32852/iqjfmme.Vol18.Iss2.87

Keywords:

ceria-yttria stabilized zirconia, plasma sprayed coating, hardness, Fracture toughness, Weibull's modulus

Abstract

Several studies have been made during the recent years to evaluate the plasma sprayed
yttria partially stabilized zirconia thermal barrier coatings but less attention were
undertaken on ceria-yttria stabilized zirconia. In this study, zirconia- 20 wt% ceria-3.6
wt% yttria thermal barrier coatings were produced by air plasma spraying deposited on
IN 738 LC superalloy substrate. The objective of this study is to analysis the distribution
of porosity, hardness and fracture toughness on the deposited coatings. Under optimum
plasma spraying conditions, it is dangerous to consider the mean values of hardness and
fracture toughness. The distributions of hardness and fracture toughness are highly
scattered. The Weibull distribution is the main parameter to describe the plasma sprayed
coatings hardness and fracture toughness.

Downloads

Published

2018-08-04

Issue

Vol. 18 No. 2 (2018): THE IRAQI JOURNAL FOR MECHANICAL AND MATERIALS ENGINEERING

Section

Articles

How to Cite

HARDNESS AND FRATURE TOUGHNE OF PLASMA SPRAYED ZIRCONIA-CERIA-YTTRIA THERMAL BARRIER COATINGS. (2018). THE IRAQI JOURNAL FOR MECHANICAL AND MATERIALS ENGINEERING, 18(2), 214-228. https://doi.org/10.32852/iqjfmme.Vol18.Iss2.87
Crossref
Scopus
Google Scholar
Europe PMC